External Trucks

External Flagpole Trucks sit at the top of each flagpole, providing an exposed pulley and rope system for raising and lowering the flag.

All Trucks are designed to accept Balls, Eagles and Finials. Standard Spindle Threading is 1-1/4″ NPT (1″ NPT and 1-1/2″ NPT Spindles available upon request). External Halyard Trucks may be combined to achieve quantity discounts.

Powder Coat Finish Options
BZT = Powder Coat – BronzeTone
BLK = Powder Coat – Black
WHT = Powder Coat – White
CLR = Powder Coat – Clear

Finish Options >

Cap Design Trucks install over the top of the flagpole and are attached with anchoring set screws or bolts. Spindle Design Trucks incorporate a threaded spindle which is installed into a female fitting welded into the top of the flagpole. Stationary Trucks are fixed and will not rotate. Revolving Trucks rotate the flag with the wind.


External Stationary
Cap Design

External Single Revolving
Spindle Design

External Double Revolving
Spindle Design

External Halyard –
Cap Style Single Stationary Truck

• Cast Aluminum Body.
• Aluminum Pulley on Stainless Steel Axle. Nylon Pulley on Stainless Steel Axle available in sizes to 3″.
• 1/2″-13NC Top Drilling.
• Recommended Halyard Diameter – 5/16″.
• Stainless Steel Set Screws (3) on sizes to 3-1/2″ or Stainless Steel Bolts (3) on sizes 4″ and larger are provided.
• Options available to convert Stationary flagpoles into Revolving systems.

Nylon Pulley Only Available In Sizes
Up To 3″

External Halyard –
Single Revolving Truck

• Cast Aluminum Body.
• Single Aluminum Pulley on Stainless Steel Axle.
• Upper and Lower Stainless Steel Ball Bearing Assemblies.
• Non-Fouling Design.
• 1-1/4″ NPT Spindle.
• 1/2″-13NC Top Drilling.
• Recommended Halyard Diameter – 5/16″.

External Halyard –
Double Revolving Truck

• Cast Aluminum Body.
• Double Aluminum Pulleys on Stainless Steel Axles.
• Upper and Lower Stainless Steel Ball Bearing Assemblies.
• Non-Fouling Design.
• 1-1/4″ NPT Spindle.
• 1/2″-13NC Top Drilling.
• Recommended Halyard Diameter – 5/16″.

External Halyard –
Heavy-Duty Single Revolving Truck

• Heavyweight Cast Aluminum Body and Components.
• Single Aluminum Pulley with Stainless Steel Axle.
• SEALED Upper and Lower Stainless Steel Ball Bearing Assemblies.
• 1-1/4″ NPT Spindle.
• 1/2″-13NC Top Drilling.
• Recommended Halyard Diameter – 3/8″.

External Halyard –
Heavy-Duty Double Revolving Truck

• Heavyweight Cast Aluminum Body and Components.
• Double Aluminum Pulleys with Stainless Steel Axle.
• SEALED Upper and Lower Stainless Steel Ball Bearing Assemblies.
• 1-1/4″ NPT Spindle.
• 1/2″-13NC Top Drilling.
• Recommended Halyard Diameter – 3/8″.

External Halyard –
In-Line Single Revolving Truck

• In-Line Cast Aluminum Body.
• Single Aluminum Pulley on Stainless Steel Axle.
• Upper and Lower Stainless Steel Ball Bearing Assemblies.
• 1-1/4″ NPT Spindle.
• 1/2″-13NC Top Drilling.
• Recommended Halyard Diameter – 5/16″.

External Halyard
Cap Style Single Revolving Truck

• Cast Aluminum Truck Body and Adapter.
• Single Nylon or Aluminum Pulley on Stainless Steel Axle.
• Attach with three (3) Stainless Steel Set Screws.
• Upper and Lower Stainless Steel Ball Bearing Assemblies.
• 1/2″-13NC Top Drilling.
• Recommended Halyard Diameter – 5/16″.

Use to modify original External Stationary systems (or Revolving systems with damaged top insert threads) into a Revolving system. Contact Customer Service for applications requiring larger custom sizes.

Nylon Pulley Available

Cap Style Truck Adapters

Create External Revolving Systems from existing Stationary systems (or Revolving systems with damaged top insert threads). Revolving Trucks sold separately.

• Cast Aluminum construction.
• Tapped 1-1/4″ NPT.
• Up to 2-1/2″ Shaft Top Diameter provided with three (3) Stainless Steel Set Screws.
• 3″ to 4″ sizes provided with three (3) Self-Tapping Stainless Steel Screws.
• 4-1/2″ and larger sizes provided with three (3) Stainless Steel Bolts.

Custom larger sizes available.
Contact Customer Service for size and pricing options.